[Script] V6 SuperCharger !! HTK & BulletProof Launchers! FIX MEMORY FOR ALL ANDROIDS!

[bigeric828]

Ok just redid it again. Copy and paste wasn't putting the line returns in so I took care of that problem, but now I'm getting the mo error message.

Sent from my Droid using DroidForums

ya i just went ahead and copied the ro commands into local.prop instead of typing. So now if it doesnt work, well, then either im really dumb(plausible) or my phone simply doesn't want it to work. but im calibrating my battery so i can reboot until later.

[zeppelinrox]

Ive never seen that error can you share the script manager output

[rck76]

Ive never seen that error can you share the script manager output

Command: '/mnt/sdcard/3gtweak' -------------Out: exec sh '/mnt/sdcard/3gtweak' # exec sh '/mnt/sdcard/3gtweak' mo: not found

Sent from my Droid using DroidForums

[bigeric828]

Ive never seen that error can you share the script manager output

Command: '/mnt/sdcard/3gtweak' -------------Out: exec sh '/mnt/sdcard/3gtweak' # exec sh '/mnt/sdcard/3gtweak' mo: not found

Sent from my Droid using DroidForums

thats what i got as well or something real similar.

[zeppelinrox]

That mo error looks like a truncated mount command.

Not sure if this will work but try with qr code to load 3G TurboCharger script..


In script manager switch to browser mode, press menu and select new script

[rck76]

That mo error looks like a truncated mount command.

Not sure if this will work but try with qr code to load 3G TurboCharger script..


In script manager switch to browser mode, press menu and select new script

I just edited the local.prop manually but still not seeing any improvement, ran speed test 10 times. Only one run was better than average, but I don't get very good reception with my 3g anyway. I'm on Wi-Fi most of the time. I might try the QR code later though just to see if it works. Thanks

Sent from my Droid using DroidForums

[metalspring]

That mo error looks like a truncated mount command.

Not sure if this will work but try with qr code to load 3G TurboCharger script..


In script manager switch to browser mode, press menu and select new script

I just edited the local.prop manually but still not seeing any improvement, ran speed test 10 times. Only one run was better than average, but I don't get very good reception with my 3g anyway. I'm on Wi-Fi most of the time. I might try the QR code later though just to see if it works. Thanks

Sent from my Droid using DroidForums

It works on wifi too I believe lol, so test it with that

Sent from my Droid using DroidForums

[rck76]

That mo error looks like a truncated mount command.

Not sure if this will work but try with qr code to load 3G TurboCharger script..


In script manager switch to browser mode, press menu and select new script

I just edited the local.prop manually but still not seeing any improvement, ran speed test 10 times. Only one run was better than average, but I don't get very good reception with my 3g anyway. I'm on Wi-Fi most of the time. I might try the QR code later though just to see if it works. Thanks

Sent from my Droid using DroidForums

It works on wifi too I believe lol, so test it with that

Sent from my Droid using DroidForums

Thanks, I will try later

Sent from my Droid using DroidForums

[metalspring]

wow... check this out...
I had already did the 3g turbo tweaks... here are the first 7 runs... up the 12:09am



Then I ran a slightly modified script from post 343
These are the only network/bandwidth entries in the script I ran...

sysctl -w net.core.wmem_max=524288
sysctl -w net.core.rmem_max=524288
sysctl -w net.ipv4.tcp_tw_recycle=1
sysctl -w net.ipv4.tcp_rmem='6144 87380 524288'
sysctl -w net.ipv4.tcp_wmem='6144 87380 524288'

Then I got THIS!

Btw Zeppelin, did you see my post about this tweak you put up? I tried it and it broke the mobile data settings under wireless connections badly, force close and ONLY way to get 3g signal again was through a reboot, I think it also broke reconnecting to 3g in general because even after airplane mode I couldn't get it back...did I do it wrong then?

Sent from my Droid using DroidForums

[bigeric828]

Ok so i did it and when it gets the code it puts the script into the name in which you can't save. So i just renamed it to 3g turbocharger script.

I ran it and got

"exec sh '/mount/sdcard/3g turbo charger script'
# exec sh '/mnt/sdcard/3g turbocharger script'

then nothing happens.

Ok so local.prop seems to have been modified(i think? i put in the values earlier but don't remember if i deleted them or not). rebooting a couple times then testing.