Lithium mod Kernels . Official kernel of Lithmod

[audioscience]

Running LithMod 1.0.12, Watermark'd.

Loaded the 1200 MHz kernel, SetCPU froze my phone twice; once to the point where I had to pull the battery. Had the 1100 MHz kernel on, phone was running pretty hot with that one; Had a bit of lag coming out of the browser/other apps. Any ideas?

What ideas do you want? Your' overclocking your phone to twice what it is rated for? If it doesn't work, it doesn't work. Go back to a lower clock.

I find performance pretty excellent at 800Mhz with temps under 90 degrees most of the time.

[Smeech]

Man, I've loving this kernal. I'm running the 1200mhz kernal. Using the same settings that I did with the slayher on liquid and p3 here on lithium, it's running the coolest I've seen on 2.2.

I'm really averaging 100-105*(or lower) while browsing with far fewer spikes than before. Before I'd average 115-120* where SetCPU kept stepping down the speed.

[TuBitMittens]

what is the lowest frequency on the 1ghz(1000mhz) kernel??

[WAHarris]

what is the lowest frequency on the 1ghz(1000mhz) kernel??

All of them start at 300Mhz, so its a 300-1000Mhz.

[villain1998]

Ok, I'm running into this issue. I've been running litmod for weeks on a P3 kernel from his website. Everything has been great for the most part a few FC but nothing major. The reason why I chose P3 is because for some reason his kernels allow me to do wireless tether along with CPU monitoring. Unfortunately my phone has been running over 120 degrees now so I'm looking for a new Kernel. I used the ones from the OP, but I'm not able to use wireless tether, it says there is no internet access.
Thanks

[BlackMarket]

Just installed that 1325 beast... initial boot was flawless... immediately ran quadrant and returned a score of 1570... my best yet.

Will keep you posted on any issues.

[SSHGuru]

I've been running 1000, min 250 max 1000 with no problems at all for a while now. When I tried the much faster speeds I got re-boots. And it's more than fast enough at 1000.

[currensy]

What are the benefits of downloading a kernal....i am using lithmod

[SSHGuru]

You can get SetCpu and overclock your Droid. I am running at 1000mhz right now.

What are the benefits of downloading a kernal....i am using lithmod

[BlackMarket]

So the 1325 is a tad glitchy coming out of seep, even with SetCPU with a min of 500 when screen is off... really only noticeable when I swipe between home screens.

If I kill some apps and clear my cache, oddly it smooths out.

Still no force closes or reboots.