Reboot it. It'll be fine.
Hey maybe someone could shed some light on an issue I'm having. I tried a .247 update from .905 and got hung up when I tried to verify the md5. This is the message I got:
1346 kb/s <20199 bytes in 0.014s>
8 kb/s <53 bytes in 0.005s>
rm: remove '/data/local/tmp/sa-md5sum'?
At this point the keyboard was not responsive and eventually it failed the install. When I check the SD card I do see the 247.md5 file but I didnt see the 247 update file when I ran through a second time and skipped the update to SD card and md5 check. I got to the recovery menu but no update to select on the SD card. I'm obviously new to this but I appreciate any help I can get. Going to bed so I will start fresh tomorrow, thanks!
Sounds like the update zip did not transfer
ICS Droid Bionic
.247 courtesy of HoB
OC @ 1.333Ghz
At the moment you can't boot. You need to get the update on the sdcard. Since the phone won't boot until the update is installed in recovery you'll need to do it outside the phone.
Sent from my Xoom using Tapatalk 2
Sam thanks a lot putting the HoB together it made everything simple and easy to follow. I'm now on 247.....The amount of work involved.......WOW.....
You only need to copy the Blur_Version zip fie to the sdcard. The other files are for the HouseOfBionic script. In fact, since your process didn't complete before, you should manually delete the 247.md5 file as that normally gets cleaned up at the end of the process. Sounds like you have some PC issues going on that are outside of the scope of what I can support. It can take a while to transfer the file, but, it generally doesn't lock up the PC in doing so. I've done it from a Linux VM and haven't had issues like that, so, something is definitely not quite right with your PC.
I have a quick question. I installed 232 with HoB yesterday. When I reboot the phone, it comes up in the AP FastbootFlash Mode (S) (FLash Failure) screen. I press volume up and down and power it up and select Normal Powerup and it boots fine. How do I fix this?
Well, I guess if you'd use that, I'll try it too
I guess I should have fired up the HoB again, then I wouldn't have needed to ask that stupid question.
Last edited by djdavid60; 10-07-2012 at 09:55 AM.