Hold the volume +/- at the same time without holding the power button when you get on the blank screen.
Basically, when you RSD the phone should reboot and then say Pass; I don't think you're getting to that point. Are you sure the cable is stock? Do you have the latest drivers and RSD? Redownload the XML file too. You can try a different USB port on the computer, I heard that sometimes using the ports on the front are not ideal.
Last edited by orangechoochoo; 11-12-2012 at 08:48 PM.
It's the cable, you may think it's fine but as the OP of this thread discovered the cable does make a difference.
You say RSD says Pass so that means your phone should be booted. If your phone doesn't reboot it will hang until you reboot.
Today i downloaded the latest verision of RSD Lite 6.1.4 and the latest motorola drivers 5.9.0. I have a original motorola cable. I flashed again with no luck.
This are the screens of the RSD
First flashed ok and stucks in Reboots time because the phone stuck in blank screen
And then please manually power up the phone. Take off baterry and turn on. Blank screen again.
Stucked because the phone didnt boot up the system.
When the phone pass the motorola logo it recognize me a Motocast drive letter with the motocast software.
I am thinking if i can do some testpoint to erase all the memory phone and start again or think that is full bricked.