help..phone wont recognize computer

[stabl4life82]

when i plug my droid 3 into my computer, it isnt coming up with anything..it is only charging and i dont have the option in the notification bar to do anything..i cant find it on my pc either...i have changed usb ports and cords...it was working fine 2 days ago..the only thing i have done is installed the new improved rom that is on here..everything else works fine as well....i did defrost more apps after installed the new rom and i even went back and unfrosted them to see if that was the issue and it wasnt...what can i try or do?

[stabl4life82]

i dont know what i did but it started working

[Fr33dom]

I don't think there are any ROMs yet for this phone. You must be talkiing about having rooted your phone, or having applied the update.

[hoytpr]

I had the same problem. My USB simply did not detect any computers, and the computers did not detect the DROID3. I'd only had the phone 3 days and the store wanted to send me a refurbished one. I held out for a new phone and when I plugged it in at home it worked!. But then at work, the same thing happened... it'll charge the phone, but not "synch-up".

FWIW: I did install the latest USB drivers, but I noticed at work that there must be a really large power draw on the USB. I tried every USB port including one on a hub (yes, I know they say not to do that). The hub's LED nearly went dark! This phone really sucks juice. Well, last night I plugged my phone in to the charger at home, and in the dark room, there was an easily visible SPARK! I suggest everyone plug the micro-USB in first, then plug in the USB at the charger.

What's up with these USBs? The store people acted like it was really odd... clearly that's not true as my research shows this is a common problem, and I have two phones in a row with one just barely better than the other. (The phone serial numbers were only a few hundred apart). Oh, yes I was on the phone with tech support for a couple hours and yes I tried the hard rest. THe phone is great otherwise, except for the long pauses sometimes when hitting the "back" button.

-pete

[Fr33dom]

The USB standard dictates what the current is for the bus. I don't think the phone drawing more power is an accurate assumption.

If it happens again, restart both devices and if the problem still exists, try on another computer.

[hoytpr]

Thanks for your suggestions. But I have read and researched this extensively. I certainly restarted both devices (especially after downloading MOTOs drivers). I also tried this on at least six computers, albeit all running XP or XPx64. The phone works on one of those computers, not on any others. If this phone isn't drawing more current than the average USB device, then there are a lot of computer part suppliers and system sellers (Dell, Gigabyte, Asus, Supermicro) that don't know what they are doing. Also, I've never seen an USB device spark when plugged in before. I like this phone, but it seems USB-unfriendly.

[stabl4life82]

Yes I was talking about the update and not a rom. Lol

Sent from my DROID3 using DroidForums

[Fr33dom]

Thanks for your suggestions. But I have read and researched this extensively. I certainly restarted both devices (especially after downloading MOTOs drivers). I also tried this on at least six computers, albeit all running XP or XPx64. The phone works on one of those computers, not on any others. If this phone isn't drawing more current than the average USB device, then there are a lot of computer part suppliers and system sellers (Dell, Gigabyte, Asus, Supermicro) that don't know what they are doing. Also, I've never seen an USB device spark when plugged in before. I like this phone, but it seems USB-unfriendly.

Well I can't speak to your assertion about the parts suppliers, but if there is a spark when you plug it in then something, somewhere is seriously wrong. As I understand it, most USB ports are current limited to 500 mA though a confirmation search turned up a page claiming that some MB manufacturers do some level of phone detection and perhaps are allowing more if a phone is connected. Either way, sparks would seem to indicate a problem.

[Fr33dom]

The wall charger lists at 850 mA.

[hoytpr]

The wall charger lists at 850 mA.

Well I just want to followup with a small admission. At least some of the problems were USB cablen related. I was able to get one of the ccomputers at work to sync-up with this phone using a different cable (the one that can be removed from the charger). So it is possible that with a good enough cable the phone will work okay (the MOTO drivers are needed though). So mea culpa. All my claims are not valid until some retesting is done. I apologize for the confusion. MAYBE the other cablles were only rated at USB1.1? I don't want to provide innacurate information.