[6-1-2012] .906 sbf

[benningmk]

hey...
i`m on .906, but i can`t flash these file. i only get this message on my display:

AP Fastboot Flash Mode (S) (Flash Failure)
0A.53

Battery Low
Cannot Program
Connect USB
Data Cable

My phone will not charge, so when i startet to flash i get the message not.ok cause of low battery. Anyone an idea ?

[linuxgator]

hey...
i`m on .906, but i can`t flash these file. i only get this message on my display:

AP Fastboot Flash Mode (S) (Flash Failure)
0A.53

Battery Low
Cannot Program
Connect USB
Data Cable

My phone will not charge, so when i startet to flash i get the message not.ok cause of low battery. Anyone an idea ?

You will need to find someone other way to charge your battery. You may be able to find an external battery charger at a local battery store or something like that, or you could just buy a new battery which should be charged enough to do the flash. Alternatively, there are lots of options online, including a Motorola factory style cable, but those are a little more pricey and will take a few days to get.


Sent from my DROID BIONIC using Tapatalk 2

[ovelayer]

You will need to find someone other way to charge your battery. You may be able to find an external battery charger at a local battery store or something like that, or you could just buy a new battery which should be charged enough to do the flash. Alternatively, there are lots of options online, including a Motorola factory style cable, but those are a little more pricey and will take a few days to get.


Sent from my DROID BIONIC using Tapatalk 2

exatically right

[acoers]

I'm trying to do this and i do have .906 but when i plug the usb in the phone it makes a different noise on the computer and just stays at waiting for devices. any help would be great thanks..

[ovelayer]

I'm trying to do this and i do have .906 but when i plug the usb in the phone it makes a different noise on the computer and just stays at waiting for devices. any help would be great thanks..

sounds like you need to download and install the lates moto usb drivers on your pc
https://motorola-global-portal.custh...r-my-device%3F

[acoers]

Ok looks like updated the drivers worked. Now its just been on the Motorola Dual Core Technology for like 10-15 minutes. Should it have booted already?

[ovelayer]

Ok looks like updated the drivers worked. Now its just been on the Motorola Dual Core Technology for like 10-15 minutes. Should it have booted already?

that usually happens when you were not initially on the 906 ota before you used the 906 sbf
just download the 906 ota update use your computer to put it on your external sdcard
boot into stock recovery pwr+x and install the update
you should then boot normally

[acoers]

when i try pwr x i get a triangle with a highin mark next to a droid guy

[ovelayer]

great work, thanks

dont forget to click the like button..and your very welcome

[jogard101]

when i try pwr x i get a triangle with a highin mark next to a droid guy

Yeah I'm having the same issue. No stock recovery with x+pwr. All I get is the Motorola dual core logo. just locked up.
I pull the battery to reset and the only recovery I can get into is the m+pwr.

Prior to attempting the .906 sbf, I was running liberty Rom and safestrap 2.x(I think) and I did check the software version and it was showing a to be a 906 version.

I had to change the file name from 1_CLICK_SBF.exe-dl=1 to 1_CLICK_SBF.exe for windows to let me run it.
Program seemed to run flawless.
When it finished it loaded and rebooted to the Motorola dual core screen. I let it set for about ten minutes before I pulled the battery. I grabbed a beer (so as not to skip any important steps) and tried again.
No luck.

I am trying to get this phone back to stock so I can give it to my nephew. His mother would prefer it that way in case she want's to get it warranted.

Any help? I would sure appreciate it!