DroidForums.net is the original Verizon Android Forum! Registered Users do not see these ads. Please Register - It's Free!
Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Droid 2 SBF Problem/Recovery Problem

  1. Junior Droid
    Sakker's Avatar
    Member #
    211246
    Join Date
    Jul 2011
    Posts
    6
    Phone
    Enter Current Phone Model Here
    #1

    Droid 2 SBF Problem/Recovery Problem

    So... a friend of mine rooted my phone and installed a bunch of nifty software, which I never learned how to use.
    Cyanogenmod, clockwork, etc
    My phone worked perfectly, until I went to use the Droid 2 Bootstrapper to restore to a backup I had made. I just wanted to restore the backup, because I was not using the new apps and 2.3 to its full potential, and wasn't gaining anything out of having a rooted droid2.

    So I loaded up bootstrapper, proceeded as the instructions told me, and when I went to restart into the recovery the phone got stuck on the M logo on bootup.

    After much research I download RSD Lite v4.9 and the SBF (VRZ_A955_2.3.20_1FF_01.sbf). However, when I started the phone in the bootloader RSD lite is not recognizing the phone, resulting in my total inability to flash to the sbf.

    Any suggestions? I cannot boot the phone up, because it gets stuck on the Motorola logo. Wiping the phone does nothing, and I'm kind of at a loss atm.
  2.  
     
     
     
  3. Rescue Squad
    UrbanBounca's Avatar
    Member #
    121587
    Join Date
    Sep 2010
    Location
    Virginia
    Posts
    2,095
    Liked
    62 times
    Phone
    Samsung Galaxy Centura
    Premium Member
    #2
    Did you install the Motorola USB drivers? Cyanogen has a built in bootstrapper, so installing another bootstrapper will cause a conflict. At this point, you must SBF.
  4. Junior Droid
    Sakker's Avatar
    Member #
    211246
    Join Date
    Jul 2011
    Posts
    6
    Phone
    Enter Current Phone Model Here
    #3
    Yes, I installed the usb drivers. Hell my computer recognized the phone but RSD just won't pick it up.
    An older version or RSD picked up my phone, I think it was 4.1. But, when I clicked start it failed, so I updated to 4.9, and now its not seeing the phone.
    Thanks for the speedy reply.
  5. Rescue Squad
    UrbanBounca's Avatar
    Member #
    121587
    Join Date
    Sep 2010
    Location
    Virginia
    Posts
    2,095
    Liked
    62 times
    Phone
    Samsung Galaxy Centura
    Premium Member
    #4
    Quote Originally Posted by Sakker View Post
    Yes, I installed the usb drivers. Hell my computer recognized the phone but RSD just won't pick it up.
    An older version or RSD picked up my phone, I think it was 4.1. But, when I clicked start it failed, so I updated to 4.9, and now its not seeing the phone.
    Thanks for the speedy reply.
    Did you reinstall the USB drivers after installed 4.9? Motorola software is tricky sometimes.
  6. Junior Droid
    Sakker's Avatar
    Member #
    211246
    Join Date
    Jul 2011
    Posts
    6
    Phone
    Enter Current Phone Model Here
    #5
    Yup, I installed the drivers, then RSD 4.9, then the drivers again, restarted, drivers again, restarted, etc.

    I am going to uninstall everything and start from scratch right now.
  7. Rescue Squad
    UrbanBounca's Avatar
    Member #
    121587
    Join Date
    Sep 2010
    Location
    Virginia
    Posts
    2,095
    Liked
    62 times
    Phone
    Samsung Galaxy Centura
    Premium Member
    #6
    How did it work out?
  8. Junior Droid
    Sakker's Avatar
    Member #
    211246
    Join Date
    Jul 2011
    Posts
    6
    Phone
    Enter Current Phone Model Here
    #7
    It didn't. The computer recognizes there is a device plugged in, but RSD is still not recognizing the phone.

    Now my battery has died, so bootloader keeps saying low battery, can't program. Tried plugging it into the wall and the phone attempts to boot up, and still gets stuck on the Motorola logo, and doesn't charge.

    I'm probably on my way to the verizon store to see if they can flash to default, or at least charge my batter, or see if I can buy a batter only charger.
  9. Rescue Squad
    UrbanBounca's Avatar
    Member #
    121587
    Join Date
    Sep 2010
    Location
    Virginia
    Posts
    2,095
    Liked
    62 times
    Phone
    Samsung Galaxy Centura
    Premium Member
    #8
    Quote Originally Posted by Sakker View Post
    It didn't. The computer recognizes there is a device plugged in, but RSD is still not recognizing the phone.

    Now my battery has died, so bootloader keeps saying low battery, can't program. Tried plugging it into the wall and the phone attempts to boot up, and still gets stuck on the Motorola logo, and doesn't charge.

    I'm probably on my way to the verizon store to see if they can flash to default, or at least charge my batter, or see if I can buy a batter only charger.
    Have you tried holding the "Up" arrow and booting into bootloader to charge it?
  10. Junior Droid
    Sakker's Avatar
    Member #
    211246
    Join Date
    Jul 2011
    Posts
    6
    Phone
    Enter Current Phone Model Here
    #9
    Didn't know about that command, it should be charging now. The charging light led is on and the phone is not stuck booting, so I'm giving it a little bit to charge then will try again.
    After it charges I'm going to attempt to use a different computer. Hopefully the next computer I use will recognize the phone.
  11. Rescue Squad
    UrbanBounca's Avatar
    Member #
    121587
    Join Date
    Sep 2010
    Location
    Virginia
    Posts
    2,095
    Liked
    62 times
    Phone
    Samsung Galaxy Centura
    Premium Member
    #10
    Quote Originally Posted by Sakker View Post
    Didn't know about that command, it should be charging now. The charging light led is on and the phone is not stuck booting, so I'm giving it a little bit to charge then will try again.
    After it charges I'm going to attempt to use a different computer. Hopefully the next computer I use will recognize the phone.
    That said, once it's charged, let it stay in bootloader and plug it in via USB. The PC may recognize it.
Page 1 of 2 12 LastLast

Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. Problem getting into recovery.
    By camaroguy41208 in forum Droid Incredible Tech Support
    Replies: 1
    Last Post: 03-18-2011, 12:30 PM
  2. Droid 2 bootstrap/recovery problem
    By Fera6037 in forum Motorola Droid 2 Development
    Replies: 7
    Last Post: 02-07-2011, 07:22 PM
  3. Problem with recovery
    By Dizzy_ in forum Android Hacks and Help
    Replies: 4
    Last Post: 12-25-2010, 11:55 PM
  4. Problem with recovery
    By Dizzy_ in forum Droid Incredible Hacks
    Replies: 5
    Last Post: 12-25-2010, 10:51 AM
  5. Recovery problem
    By freeformlaw in forum Samsung Fascinate
    Replies: 2
    Last Post: 12-07-2010, 09:45 AM

Search tags for this page

.sbf restore
,
droid 2 bootstrap stuck at logo
,
droid 2 recovery problem
,

droid 2 sbf

,

droid 2 sbf recovery

,
droid incredible 2 stuck in low battery mode
,
droid2 sbf
,

incredible 2 sbf

,
restore droid 2
,

sbf recovery

Click on a term to search our site for related topics.
Find us on Google+