alright. once the menu comes up, it says
OK to Program
what do i do from here?
I've told you twice.
Do you have the latest drivers from Motorola installed on a PC you have Administrator access to? Do you have RSD Lite installed and ready to go?
If not you have some work to do. Start with reading this thread;
The only real difference is you want RSD Lite 4.9 or 4.8 if you can't find 4.9 and you don't need to worry about "catching" the boot, IIRC.
Next up, drivers on the PC.
USB and PC Charging Drivers - Motorola Mobility, Inc. USA
Thing at the top, install it, run it, install drivers.
Now you need RSD Lite. This is 4.8.
Multiupload.com - upload your files to multiple file hosting sites!
Now you'll need the SBF. Have you accepted or forced any updates recently?
By the way, you'll want to power your phone down while you read and prep. The phone doesn't charge in the bootloader and you'll need some good battery life to do the flashing.
alright thanks, ill get reading.
one last question. rsd lite isn't on my phone right now, or do i just download it to my comp. i guess ill find out when i read. thanks again for your help
Also the next time you go to flash the custom rom do not unzip. I noticed in the op that you unzipped then tried to install,
Motorola Droid intigeration v.1-clockwork recovery-kernel oc'd 1000lv
Well, make sure you're flashing a D2G ROM onto a D2G. Anything else and you'll screw your phone up. Bad.
Really bad. Like this bad.
Yeah 2 big mistakes there. Tried to install a D2 rom on a D2G, and unzipping the file. Read up on everything next time before you do anything and you will be fine
Sent from my DROID2 using DroidForums App