D2g battery help
This is a discussion on D2g battery help within the Droid 2 Global forums, part of the Droid 2 Forum category; does anyone have any suggestions for me to improve my battery? I literally cant go 10 minutes (ive counted) without my battery going to 90 ...
-
D2g battery help
does anyone have any suggestions for me to improve my battery? I literally cant go 10 minutes (ive counted) without my battery going to 90 or maybe 80 percent! i have alot of widgets cause i have folders and a alot of apps (86). i downloaded setcpu but dont know what settings to put them at. any suggestions for setcpu and my battery? im running hexen 1.0.1 on froyo
Last edited by Jdt283; 10-08-2011 at 03:15 PM.
-
-
Make sure that you're giving it a full charge, when the battery level reaches 100% leave it some more time plugged in, such as 30 minutes. This may prevent sudden battery level drops. My SetCPU settings are 300/300 screen off (ondemand). You may lower your display brightness, as display is the major battery hog. Also, when you are on low battery, leave the phone turn off by itself as you may discover that it spends a lot of time on the lowest levels, such as 5% or even 1%. I have an extended battery and my phone nearly stays a whole day at 1% (5% system battery level). The 1% is according to Battery Monitor Widget Pro. Good luck!
-

Originally Posted by
Jdt283
does anyone have any suggestions for me to improve my battery? I literally cant go 10 minutes (ive counted) without my battery going to 90 or maybe 80 percent! i have alot of widgets cause i have folders and a alot of apps (86). i downloaded setcpu but dont know what settings to put them at. any suggestions for setcpu and my battery? im running hexen 1.0.1 on froyo
You ought to check out battery university. Google it. It explains at exhaustive length why it immediately drops among other battery phenomena and myths. It tells you how to charge, why the full charge is actually very harmful to longevity of Li-Ion batteries and much much more. If you know a little physics this is a site you'll love. If you don't, read a little bit about potential differences and then head over, because it is important to understand a little about the difference between voltage and current.
If you don't feel like all of that, the short answer is this: think of your battery as a rubber band. At full charge it's stretched to maximum potential (any more would snap it). This isnt comfortable so the battery tends to lower its potential immediately after it stops charging. Just like stretching a rubber band to the maximum repeatedly will wear it out, so it is with batteries. At Max potential (voltage) or stretch in the case of the rubber band, the battery gets very hot. Most modern chargers are built to only actually allow you to charge to 90% however. So actually your battery isn't what is lying to you, its your battery gauge. Once it hits about 85 it becomes accurate again. You can avoid this by shutting your phone off and then charging it (bump charging) and you'll get almost the full 100. This is hard on the battery's lifetime though so only do it when you need the extra boost for.a long day. Last but not least, charge often and little bits at a time for Max battery lifetime. The website explains why. Hope this helps...
Last edited by ashiyatl; 10-09-2011 at 04:06 AM.
-

Originally Posted by
mr.inter
Make sure that you're giving it a full charge, when the battery level reaches 100% leave it some more time plugged in, such as 30 minutes. This may prevent sudden battery level drops. My SetCPU settings are 300/300 screen off (ondemand). You may lower your display brightness, as display is the major battery hog. Also, when you are on low battery, leave the phone turn off by itself as you may discover that it spends a lot of time on the lowest levels, such as 5% or even 1%. I have an extended battery and my phone nearly stays a whole day at 1% (5% system battery level). The 1% is according to Battery Monitor Widget Pro. Good luck!
Ok thanks. Il try those. Do you have anything else on setcpu or is the screen off just it?
-

Originally Posted by
Jdt283
Ok thanks. Il try those. Do you have anything else on setcpu or is the screen off just it?
I only have the screen of settings but you can always add other settings according to your preferences/
-
I only us the screen off(300/300) setting with the on demand governor, but going to test the smartass governor kernal which is only for GB roms I think. Another thing to consider, is wiping your battery stats when you have 100% full charge. This can help improve accuracy and battery life I believe.
How to SBF your D2G!
Droid 2 Global: Cyanogenmod 9.
I do NOT offer help through PM. Sorry! Try searching for an answer to your question, but if that fails, the forums are the quickest method of getting help!
-

Originally Posted by
mr.inter
Make sure that you're giving it a full charge, when the battery level reaches 100% leave it some more time plugged in, such as 30 minutes. This may prevent sudden battery level drops. My SetCPU settings are 300/300 screen off (ondemand). You may lower your display brightness, as display is the major battery hog. Also, when you are on low battery, leave the phone turn off by itself as you may discover that it spends a lot of time on the lowest levels, such as 5% or even 1%. I have an extended battery and my phone nearly stays a whole day at 1% (5% system battery level). The 1% is according to Battery Monitor Widget Pro. Good luck!
Do you like but this is wrong wrong wrong you do not give a full charge to a lithium ion battery as a long term solution. The result of doing this over long periods of timeis that it causes ion plating. This is because when you give it a full charge the potential difference between the anode in the cabinet battery bridget the maximum value when it happens the battery gets hot when things get hot chemical reactions occur within the battery that do not otherwise occur. When this happens the anode and cathode are permanetly insulated from opposite charges to a certain extent this reduces the maximum potential the battery can ever have again. This in turn permanently reduces the capacity of the battery.
Don't take my advice if you don't want to but im a biochemistry / physics graduate...I know what I'm talking about lol.
-

Originally Posted by
Jdt283
does anyone have any suggestions for me to improve my battery? I literally cant go 10 minutes (ive counted) without my battery going to 90 or maybe 80 percent! i have alot of widgets cause i have folders and a alot of apps (86). i downloaded setcpu but dont know what settings to put them at. any suggestions for setcpu and my battery? im running hexen 1.0.1 on froyo
If you are rooted read My Battery Life Writeup in the D2G forums here- lots of good info, also tells which apps you might want to freeze. Also consider an extended battery- I love my Gorilla Gadgets battery- Google that if interested. If you aren't rooted, give that some consideration. You can freeze useless apps, use SetCPU (you do, so I assume you are rooted), and install another ROM if you are interested. After rooting, you can do as much or as little as you prefer.
D2G
Rooted & ROM'ed
CyanogenMod 7
-

Originally Posted by
ashiyatl
Do you like but this is wrong wrong wrong you do not give a full charge to a lithium ion battery as a long term solution. The result of doing this over long periods of timeis that it causes ion plating. This is because when you give it a full charge the potential difference between the anode in the cabinet battery bridget the maximum value when it happens the battery gets hot when things get hot chemical reactions occur within the battery that do not otherwise occur. When this happens the anode and cathode are permanetly insulated from opposite charges to a certain extent this reduces the maximum potential the battery can ever have again. This in turn permanently reduces the capacity of the battery.
Don't take my advice if you don't want to but im a biochemistry / physics graduate...I know what I'm talking about lol.
Not if your battery gauge lies A LOT to you even after a lot of battery stats wipes.
-

Originally Posted by
mr.inter
Not if your battery gauge lies A LOT to you even after a lot of battery stats wipes.
If what you're saying is true you have to charge the phone while it is off not necessarily give it a full charge as long as the phone is powered on the charging will be controlled by software and/or the charger
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules
Similar Threads
-
By mastervader in forum Motorola Droid Bionic
Replies: 3
Last Post: 11-17-2011, 03:22 PM
-
By tjplace in forum Tech Issues, Bug Reports & Suggestions
Replies: 1
Last Post: 09-13-2011, 05:42 PM
-
By deadlift425 in forum Droid X Hacks
Replies: 5
Last Post: 07-22-2011, 12:05 PM
-
By dgstorm in forum Droid News
Replies: 49
Last Post: 03-21-2011, 01:24 PM
-
By funzach in forum Droid Incredible Tech Support
Replies: 1
Last Post: 08-09-2010, 08:36 AM
Search tags for this page
android battery exclamation point
,
droid 2 global battery
,
droid 2 global battery inaccurate
,
droid 2 global battery stats wiping
,
droid global battery wont hold charge
,
droid global wipe battery stat
,
droid incredible 2 battery doesnt charge 100
,
gorilla gadget extended battery wont charge
,
gorilla gadgets battery exclamation point
,
how long does the droid 2 global battery last
,
how to increase battery life on d2g
,
my gorilla gadget extended battery shows a exclamation point
,
weak battery on the droid global 2
,
why wont my gorilla gadget battery charge?
,
you let your lithium-ion battery die, the d2g will not recha
Click on a term to search our site for related topics.
Tags for this Thread