DroidForums.net is the original Verizon Android Forum! Registered Users do not see these ads. Please Register - It's Free!
Page 1 of 3 123 LastLast
Results 1 to 10 of 27

Thread: Stock Rubix 1.9.5. What to do with JRummy DX OC

  1. Master Droid
    NeoandGeo's Avatar
    Member #
    36398
    Join Date
    Feb 2010
    Posts
    452
    Liked
    9 times
    Phone
    Xperia Play
    #1

    Stock Rubix 1.9.5. What to do with JRummy DX OC

    I have installed 1.9.5, and decided to purchase The DX Overclock App from JRummy16. I am guessing I will need a new kernel in order to use the app for OC purposes. Can someone point me in the right direction of a reliable kernel, and more importantly, some cool things I can do with this app even if I don't OC.

    Thanks
  2.  
     
     
     
  3. Droid Ninja
    cpjr's Avatar
    Member #
    17607
    Join Date
    Dec 2009
    Location
    Atlanta
    Posts
    1,598
    Phone
    HTC ThunderBolt
    #2
    Cant install custom kernels on a Droid X because of the locked bootloader...the app does everything for you. Just pick what options you want in it and DONT go straight to the max overclock because if your phone doesnt like it and ends up bootlooping you will have to redo everything.

    PS- If you wanna know what the app does, look through the app.
    HTC THUNDERBOLT Rooted / Perfect Storm 1.2 ROM / Overclocked @ 1.80GHZ

    Evolution : Droid 1 - Incredible - Droid X - Thunderbolt
  4. Master Droid
    NeoandGeo's Avatar
    Member #
    36398
    Join Date
    Feb 2010
    Posts
    452
    Liked
    9 times
    Phone
    Xperia Play
    #3
    That's where I'm confused. I don't see any indication that I can go over 1ghz in the options.
  5. Droid Ninja
    cpjr's Avatar
    Member #
    17607
    Join Date
    Dec 2009
    Location
    Atlanta
    Posts
    1,598
    Phone
    HTC ThunderBolt
    #4
    In the app goto Set scaling frequencies, choose the oc script you want, then goto CPU frequency scaling and adjust it. Its really easy.
    HTC THUNDERBOLT Rooted / Perfect Storm 1.2 ROM / Overclocked @ 1.80GHZ

    Evolution : Droid 1 - Incredible - Droid X - Thunderbolt
  6. Master Droid
    hemorrdroid's Avatar
    Member #
    33863
    Join Date
    Feb 2010
    Location
    Missouri
    Posts
    737
    Twitter
    Hemorrdroid
    Phone
    Thunderbolt
    #5
    You can try some big overclocks, just make sure that you dont have "Apply on boot" checkmarked until you know your settings are stable. Otherwise if it bootloops, you would have to do a system restore.
    Thunderbolt
    CM7 Pre-Alpha
    Good bye MOTO
  7. Master Droid
    NeoandGeo's Avatar
    Member #
    36398
    Join Date
    Feb 2010
    Posts
    452
    Liked
    9 times
    Phone
    Xperia Play
    #6
    Gotcha. I was looking at the slot frequency settings in another part of the app, and got a little scared. All is good now. Thanks for the help.
  8. Junior Droid
    Kuonji's Avatar
    Member #
    133124
    Join Date
    Nov 2010
    Posts
    25
    Phone
    Enter Current Phone Model Here
    #7
    I have the app but I am also confused. When I go to 'set scaling frequencies', there are a ton of options.

    If all I want to do is undervolt the cpu for more battery life, which option do I choose? I assume I choose either low voltage or ultra low voltage, and then choose "1.0GHz, 800MHz, 500MHz, 350MHz"......right?

    I don't want to lose any CPU speed from stock, just undervolt as far as it can go. I guess I'm just confused at all the options.
  9. Senior Droid
    JRobzilla's Avatar
    Member #
    131040
    Join Date
    Oct 2010
    Location
    SC
    Posts
    143
    Phone
    Droid Bionic
    #8
    Quote Originally Posted by Kuonji View Post
    I have the app but I am also confused. When I go to 'set scaling frequencies', there are a ton of options.

    If all I want to do is undervolt the cpu for more battery life, which option do I choose? I assume I choose either low voltage or ultra low voltage, and then choose "1.0GHz, 800MHz, 500MHz, 350MHz"......right?

    I don't want to lose any CPU speed from stock, just undervolt as far as it can go. I guess I'm just confused at all the options.

    When you hit Set Scaling Frequencies the next screen will ask your voltage (ultra low, low, medium etc...). After you select your voltage the NEXT screen will then be your frequency scales at that selected voltage.

    So, if you wanted to go to the lowest voltage but remain at stock speeds hit:

    Set Scaling Frequencies -> Ultra Low Volatage -> 1.0GHz, 800MHz, 500MHz, 350MHz.

    This would be a reliable way of undervolting but remaining at stock speeds without custom tinkering with sliders.

    Also, I'd stay away from the Frequencies at boot until you find a reliable configuration for your phone.
  10. Droid
    Trong's Avatar
    Member #
    96503
    Join Date
    Jul 2010
    Posts
    89
    Phone
    Droid X
    #9
    I've never been a fan of the preset LV/ULV. They use the stock voltages that came after the .340 update, which are higher than the voltages we had when we first purchased the phone, so LV/ULV might actually be the same voltage or higher than the ones our phones used to run.

    I personally prefer to use the Advance/Custom settings and manually testing out voltages/clock speeds. Been able to get 300MHz with 18V running stable. I believe the preset ULV settings only go down to the mid-20's range.

    Just for reference, I run mine at: 1200/66, 1000/55, 600/31, 300/18
    Last edited by Trong; 01-04-2011 at 09:59 PM.
  11. Master Droid
    akiles's Avatar
    Member #
    142770
    Join Date
    Nov 2010
    Location
    Fredericksburg, VA
    Posts
    265
    Liked
    7 times
    Phone
    Samsung Galaxy SIII
    #10
    I know every phone is different, but have you noticed any improment in batt life? Is it stable with those voltages?


    Quote Originally Posted by Trong View Post
    I've never been a fan of the preset LV/ULV. They use the stock voltages that came after the .340 update, which are higher than the voltages we had when we first purchased the phone, so LV/ULV might actually be the same voltage or higher than the ones our phones used to run.

    I personally prefer to use the Advance/Custom settings and manually testing out voltages/clock speeds. Been able to get 300MHz with 18V running stable. I believe the preset ULV settings only go down to the mid-20's range.

    Just for reference, I run mine at: 1200/66, 1000/55, 600/31, 300/18
Page 1 of 3 123 LastLast

Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. [MOD] Battery Numbers for Stock GB Theme - rubiX 1.9.5
    By humungus in forum Drod2169 - X
    Replies: 1
    Last Post: 12-30-2010, 10:31 AM
  2. Rubix 1.9 Stock Camera?
    By cullenisprime in forum Drod2169 - X
    Replies: 11
    Last Post: 12-08-2010, 02:57 PM
  3. Rubix Blurry vs Rubix Focused
    By Droid74 in forum Droid X Roms
    Replies: 9
    Last Post: 11-16-2010, 05:49 PM
  4. Stock Rubix Keyboard file please :)
    By jloya in forum Drod2169 - X
    Replies: 20
    Last Post: 11-04-2010, 04:57 PM
  5. Replies: 2
    Last Post: 05-02-2010, 11:00 AM

Search tags for this page

dalingrin heat
,
default droid x frequencies slots
,
droid x lowest frequency
,
droid x lowest stable frequency
,

droid x scaling frequencies best voltage

,

dx oc android

,
jrummy install battery indictor
,
jrummy overclock 1.9
,
jrummy ultra low voltage low medium
,
jrummy voltage
,
rubix .04 dx
,

slot settings for jrummy overclock

,
what are jrummys preset for undervolting?
,
what to do in 1.9.5
,
what's in 1.9.5
Click on a term to search our site for related topics.
Find us on Google+