DroidForums.net is the original Verizon Android Forum! Registered Users do not see these ads. Please Register - It's Free!
Page 1 of 3 123 LastLast
Results 1 to 10 of 23

Thread: SETCPU Profile reccomendations

  1. Master Droid
    loop4zil's Avatar
    Member #
    20893
    Join Date
    Dec 2009
    Location
    Atlanta
    Posts
    743
    Phone
    Old man Droid CM6 - Incognito
    #1

    SETCPU Profile reccomendations

    This may have already been discussed...Curious to see what others are doing.

    I just went with my gut and had these settings. One thing I notice on these setting is a lag when the phone wakes up during an inbound call. Thinking about going to 550/550 during stand-by.

    I am set at 1GHz / 250MHz

    My SetCPU profiles are:

    Charging: 1GHz / 250MHz
    Sleep/Standby: 550MHz / 250MHz
    Power<20%: 550MHz / 250MHz
    Battery>41C: 550MHz / 250MHz
  2.  
     
     
     
  3. Droid
    mvezz's Avatar
    Member #
    6462
    Join Date
    Nov 2009
    Posts
    78
    Phone
    Enter Current Phone Here
    #2
    Quote Originally Posted by loop4zil View Post
    Charging: 1GHz / 250MHz

    I remember reading that you should always lower the overclocking during charging as this can cause the Droid to heat up way too much. I could be wrong, but I thought I did read about that.

    NEVERMIND!! I went to find where I read that on the forums, but found these more trusted results contradicting what I said:
    http://www.droidforums.net/forum/dro...p-results.html
    Last edited by mvezz; 02-10-2010 at 01:32 PM.
  4. Beta Team
    thebowers's Avatar
    Member #
    8519
    Join Date
    Nov 2009
    Location
    Iowa
    Posts
    2,548
    Twitter
    dabowerman
    Phone
    Rooted Droid, OC @ 1.1 Ghz
    DroidForums.net Theme Developer
    Premium Member
    #3
    By slowing it down during charge, it will charge faster. That is the only thing that I have noticed.

    I am set at 1.1GHz / 250MHz

    My SetCPU profiles are:

    Charging: 550MHz / 250MHz
    Sleep/Standby: 250MHz / 250MHz
    Power<40%: 550MHz / 250MHz
    Battery>40C: 550MHz / 550MHz
    If you like what I do, thanks



    Your can follow me as follows

    @dabowerman - Twitter
    Derek Bower - G+ - this is where I will be @ the most and where stuff gets released first.

    Theming Guides that might come in handy
    Theming Guide for Progress Bar
    Notification Text Color Change (How to)
    Theming Guide for System Text
  5. Senior Droid
    gnmitchell's Avatar
    Member #
    13277
    Join Date
    Dec 2009
    Posts
    117
    Phone
    Rooted Droid O/C and loving it
    #4
    Quote Originally Posted by loop4zil View Post
    This may have already been discussed...Curious to see what others are doing.

    I just went with my gut and had these settings. One thing I notice on these setting is a lag when the phone wakes up during an inbound call. Thinking about going to 550/550 during stand-by.

    I am set at 1GHz / 250MHz

    My SetCPU profiles are:

    Charging: 1GHz / 250MHz
    Sleep/Standby: 550MHz / 250MHz
    Power<20%: 550MHz / 250MHz
    Battery>41C: 550MHz / 250MHz
    Those are the same specs that I use and have never had a problem coming out of stand-by when receiving an inbound call.
  6. Master Droid
    loop4zil's Avatar
    Member #
    20893
    Join Date
    Dec 2009
    Location
    Atlanta
    Posts
    743
    Phone
    Old man Droid CM6 - Incognito
    #5
    Quote Originally Posted by gnmitchell View Post
    Quote Originally Posted by loop4zil View Post
    This may have already been discussed...Curious to see what others are doing.

    I just went with my gut and had these settings. One thing I notice on these setting is a lag when the phone wakes up during an inbound call. Thinking about going to 550/550 during stand-by.

    I am set at 1GHz / 250MHz

    My SetCPU profiles are:

    Charging: 1GHz / 250MHz
    Sleep/Standby: 550MHz / 250MHz
    Power<20%: 550MHz / 250MHz
    Battery>41C: 550MHz / 250MHz
    Those are the same specs that I use and have never had a problem coming out of stand-by when receiving an inbound call.
    Mvezz...thanks for the research!

    GN...so your Call screen pops up on the first ring? It seems mine takes 2 to 2.5 rings to get the screen up. Wondering if this is normal and I am being impatient.
  7. Banned
    Matth3w's Avatar
    Member #
    25413
    Join Date
    Jan 2010
    Location
    Fort Huachuca, AZ (Originally from Pittsburgh, PA)
    Posts
    152
    Liked
    2 times
    Phone
    Bugless Beast 2.1 ROM @ 1.1GHz
    #6
    Mine is:

    Charging: 550mHz / 250MHz
    Sleep/Standby: 550MHz / 250MHz
    Power<100%: 1GHz / 250MHz
    Battery>40C: 550MHz / 250MHz
  8. BzB
    BzB is offline
    Master Droid
    BzB's Avatar
    Member #
    251
    Join Date
    Nov 2009
    Posts
    389
    Liked
    1 times
    Phone
    Galaxy Nexus
    #7
    running at 800mhz. only profiles i have active are below. haven't had any issues whatsoever.

    sleep/standby: 250mhz
    battery>40c: 250mhz
  9. Banned
    Matth3w's Avatar
    Member #
    25413
    Join Date
    Jan 2010
    Location
    Fort Huachuca, AZ (Originally from Pittsburgh, PA)
    Posts
    152
    Liked
    2 times
    Phone
    Bugless Beast 2.1 ROM @ 1.1GHz
    #8
    250mhz for me was way too low for sleep. I noticed a lag.
  10. BzB
    BzB is offline
    Master Droid
    BzB's Avatar
    Member #
    251
    Join Date
    Nov 2009
    Posts
    389
    Liked
    1 times
    Phone
    Galaxy Nexus
    #9
    i'm not noticing much lag if any. maybe, just maybe, there's a second or two delay after i wake up the phone but nothing that's really noticeable. doesn't seem to impact incoming calls or any other notifications either that happen during sleep/standby either.

    maybe running fewer profiles has less of an impact overall?

    haven't really monitored battery life to see if it's making a difference running at 250 while sleep/standby, but i'd like to think it is. lol...
  11. Droid Ninja
    Jim 777's Avatar
    Member #
    19480
    Join Date
    Dec 2009
    Posts
    2,271
    Liked
    3 times
    Phone
    See my sig, silly!
    #10
    Quote Originally Posted by Matth3w View Post
    Mine is:

    Charging: 550mHz / 250MHz
    Sleep/Standby: 550MHz / 250MHz
    Power<100%: 1GHz / 250MHz
    Battery>40C: 550MHz / 250MHz
    So real quick. As I read it, and I can be off, "Power<100%" means if there's less than 100% battery charge, then set CPU at 1Ghz. Seems kind of useless.

    Then, sleep/standby... wouldn't that be low as there's not a whole lot being asked of it? And is that when you shut the display off by clicking the power button?
    Droid Razr
    Custom Dialers for D1
    My broken glass icons: Broken Icons | Android Logo Icons (in progress): Android Icons

Page 1 of 3 123 LastLast

Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. Do not add your phone number to your profile !
    By JimMariner in forum New Member Introductions & Site Assistance
    Replies: 29
    Last Post: 01-06-2013, 02:10 AM
  2. Quick Profile
    By Dinty in forum Android Applications
    Replies: 4
    Last Post: 01-29-2010, 05:23 PM
  3. Profile Picture Problem
    By Vulcan1600 in forum Android General Discussions
    Replies: 3
    Last Post: 12-24-2009, 08:11 AM
  4. Profile info..
    By Crispy in forum Android General Discussions
    Replies: 5
    Last Post: 12-03-2009, 12:59 PM
  5. Those Who Want a Profile App
    By LordKastle in forum Android Applications
    Replies: 9
    Last Post: 12-02-2009, 08:55 PM

Search tags for this page

powersave bias
,

powersave bias setcpu

,

setcpu guide

,
setcpu htc incredible settings
,

setcpu in call profile

,
setcpu incall
,
setcpu powersave
,

setcpu powersave bias

,

setcpu profile

,

setcpu profile incredible

Click on a term to search our site for related topics.
Find us on Google+