I installed a Parrot CK3000 in my car two years ago and it worked with all of my previous phones but didn't work with the Droid. This may be old news for some, I finally got my Parrot to pair and connect with my Droid. I like a lot of folks don't like driving and holding my phone or using bluetooth earpieces. I emailed Parrot support a little over a week ago and this is the response they sent me two days ago:
Pairing can be difficult, and as such the droid is not currently considered compatible with the evolution. The phone should pair; but may not connect. What some of our customers have been able to do is to pair with the Parrot, where the Droid reads "paired but not connected" then clear the memory on the Parrot, whence it will announce "memory erasing in progress please wait". Most steering wheel controls will allow you to clear the memory with a combination of teh Volume Keys Vol- followed by Vol + 5 Times (-+-+-+-+-+). Or if you have the red/green keypad with the dial in the center, simply press and hold the red/green button at the same time. Normally when the Parrot is done it will announce PLEASE PAIR DEVIE when its done, but these customers have reported that it instead simply beeps indicating it connected to a phone, and sure enough the Droid showed it was connected and paired.
Again this work around has worked for many customers, but at this time we do not consider the Motorola Droid compatible with the CK3000 evolution, it is so with all of our other current devices, and as such do not guarantee its functionality.
If you are looking for full compatibility with the Droid phones our MKI product line is considered compatible
Thanks For Choosing Parrot
Technical Support Manager
Monday-Friday 9-7 (ET)
I followed it and it worked. I now have full bluetooth voice dial capabilites.