Removing Verizon Droid Case
For some reason my Droid has stopping working and wouldn't reset from the On/Off switch. So I needed to remove the battery to reset.
Unfortunately I couldn't figure out how to remove the case (a Verizon case ) easily. When I tried to remove the case, I couldn't do it without bending the little metal ears.
Is there some trick? I finally managed without too much of a bend, but this is a nuisance.
I really like this Verizon case (purchased with a car mount, not the one with magnets in). It was over-priced, but I don't feel like I'm going to drop it - unlike the smooth ones.
Thumb Slide Technique to Remove Droid Battery Cover
It a bit tricky the first time or two but here's the way I find it easiest. I call it my "Thumb Slide Technique."
Hold the Droid battery side up, with the camera closest to you. Place both thumbs on the "M", figures underneath (on the screen) and using slightly firm pressure (don't squeeze too much), slide your thumbs away from you and the battery cover will slide about 1/4". You can then lift off the cover. Reverse the procedure to reinstall the cover. Hope this helps.